[
Barcol Hardness Tester B934-1 Product details]:
Product Specification:
• A portable indentation hardness tester.
• Single hand operation; no operating experience required; can test any workpiece which is reachable in any site.
• Wide valid testing range equivalent to Brinell hardness 25-150 HBW.
• Used to test the hardness of all kinds of aluminum, from very soft aluminum to very hard aluminum alloys.
Extended application.
• Model 934-1 is applied to test the hardness of aluminum, aluminum alloys, copper, copper alloys, fiber reinforced plastics and rigid plastics etc.
• The improved model of it is available to test very soft metals such as lead and tin and other soft materials such as soft plastics, rubber, felt and leather etc.
• High sensitivity. Featured with 100 scales, much more sensitive than Webster hardness testers applied in aluminum alloys industry.
• No supporting required. Can test from only one side of the workpiece. No need to move or support the workpiece.
• Used to test super large and thick worpieces and assembly parts.
• Easy conversion. The test results can be converted to HB, HR, HV and HW easily through conversion table.
• Comply to standard ASTM B648-2000.
Parameters:
Indenter |
26°panhead cone, head face diameter 0.176mm |
Testing Range |
0~100HBa,equivalent to 25~150HBW |
Resolution |
0.5HBa |
Indication error |
hardness range 42~52HBa, ±2HBa;
hardness range 84~88HBa ±1HBa |
Repeatability error |
hardness range 42~52HBa, ±2HBa
hardness range 84~88HBa ±1HBa |
Net weight |
0.5kg |
Application:
• Barcol Impressor is mainly applied to test aluminum and aluminum alloys.
• Webster is used to test aluminum alloy extrusions, sheet and tubings.
• Barcol Impressor is suitable to test pure aluminum, soft aluminum alloys, super thick aluminum alloys, aluminum alloys bars and assembled aluminum alloys parts (e.g. al-alloy door &window, scaling ladder etc.)
• Relevant Standard: ASTM B648 (Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor)
• Barcol Impressor is also used to test fiber reinforced plastics and rigid plastics etc.
• Relevant Standard: ASTM D2583-07(Test Method forIndentation Hardness of Rigid Plastics by Means of a Barcol Impressor)
• The improved models of Barcol Impressor are available to test softer plastics, very soft metals, rubber and leather etc.
Standard Package:
• Tester
• Spare indenters (2 pcs)
• High value Standard hardness block (1 pc)
• Low value Standard hardness block (1 pc)
• Calibration wrench
• Supporting foot
• Carrying case